Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: techsupport on April 09, 2019, 09:35:57 AM
-
I'm trying to find information for both the AX Control unit, as well as the CX-ii control unit, related to 4+12 combo cards (4 analog trunks, 12 analog stations) and/or 24 port ONSP (analog station) and/or ASU-ii with 24-port ONSP cards.
I discovered by accident that Analog POTS lines plugged into the 4+12 combo cards on the AX Control unit will "power fail" and ring through to some Analog stations while the system is not fully booted or is powered off.
Is there anywhere in the THB or other documentation that explains how these are configured or work ?
-
I'm trying to find information for both the AX Control unit, as well as the CX-ii control unit, related to 4+12 combo cards (4 analog trunks, 12 analog stations) and/or 24 port ONSP (analog station) and/or ASU-ii with 24-port ONSP cards.
I discovered by accident that Analog POTS lines plugged into the 4+12 combo cards on the AX Control unit will "power fail" and ring through to some Analog stations while the system is not fully booted or is powered off.
Is there anywhere in the THB or other documentation that explains how these are configured or work ?
The hardware guide will tell you... There is no configuration, basically its just a relay, without power it passes the dialtone through to the ONS stations. On the embedded AMB in all systems, and on ONS combo cards, it's CO1-ONS1 and CO2-ONS2. It cannot be disabled or configured.
-
Thank you @acejavelin - that's exactly what I was looking for - hardware technical reference manual (i.e. http://edocs.mitel.com/TechDocs/Platforms/3300ICP/MiVB-7.2/sysadmin/pdfs/mivoice_business_7.2_htrm.pdf ) describes it on Page 47.
Thanks!