Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: psmith on March 19, 2019, 11:13:30 AM

Title: CX 3300 911 for two buildings same campus single SIP trunk
Post by: psmith on March 19, 2019, 11:13:30 AM

We have a CX3300 system and a single sip trunk coming in/out.

We have two buildings on one campus and all phones from both locations go out the same CX3300.

Currently all phones are on one VLAN but this could be separated into two VLANs one for each building.

Looking for a way to have one building use it's CESID and a different one for building two.

In a perfect world, it would be nice that if the phones are transported from one building to the other, it would automatically update what CESID it will dial out.  Is this even possible and if so how?

If this is not possible, what is the best option/practice to setting 911 in this scenario?

Title: Re: CX 3300 911 for two buildings same campus single SIP trunk
Post by: johnp on March 19, 2019, 08:27:23 PM

Look at the Location Specification form, youi should be able to set this up to put the phone into a zone and use the Network Zones form the provide the cesid