Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: dh_lab on November 15, 2010, 01:31:17 PM

Title: SIP INCOMMING CALLS
Post by: dh_lab on November 15, 2010, 01:31:17 PM

Hi all,
I am having a problem after configuring the SIP Trunk on Mitel....the problem is when  calls to a mitel DID number the caller does not get any ringing tone, but calls receive to a mitel and can communicate with no issues.An one tell me how could i ractify this issue?

System R10.1 ( This i have tested on R8.0 also)


dh

Title: Re: SIP INCOMMING CALLS
Post by: limamikeseven on November 23, 2010, 03:08:13 PM

Hi,

This will depend on the functionality on the SBC or other system you are connecting to. SIP is a funny animal. I currently have issues whereby no moh or RAD message will play when dialing in on SIP trunks.

Regards

Title: Re: SIP INCOMMING CALLS
Post by: v2win on November 23, 2010, 04:03:25 PM

I know there is an option in 4.1 called Avoid Signaling Hold to the Peer I am not sure what release it came out in but try changing that if its available.

Title: Re: SIP INCOMMING CALLS
Post by: limamikeseven on November 29, 2010, 01:20:12 AM

Have you tried configuring the CPN forms and do you have the options enabled in the relative COS?

Title: Re: SIP INCOMMING CALLS
Post by: Chakara on November 29, 2010, 11:43:06 PM

  Afeef - please start a different thread as the symptoms of your issue are clearly different.

Thanks!

-Chak