Mitel Forums - The Unofficial Source
Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: hsearson on November 12, 2010, 12:24:18 PM
-
I have a 200-ICP running 5.0 software release. I am trying to configure our mobile extension application to display a different number than our companies current caller id tag so our employees can tell when a call is coming to them via mobile extension (without using answer confirmation).
In form 54 I have programmed then Calling Party numbers to test, The Extension, The Desktop Monitor, and the Outgoing Mobile Extension numbers to cover all bases.
In form 22 I enabled CPN
In form 4 I verified option 113 is enabled.
This is an embedded Pri.
Called our service provider to verify that we can substitute outbound caller id.
Is there anything else I am missing?
-
also in form 22, entered *6
went to form 43 and added pri discall on and secure telnet into port 2002, was able to see the ani being sent.
200 is working fine but CO is still overriding
-
Thanks for coming back and letting us know what the problem was!
-Chak