Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: irongladiator on December 19, 2018, 06:03:32 PM

Title: Mitel SX-200 - Support for SIP
Post by: irongladiator on December 19, 2018, 06:03:32 PM

Hello Fellow Mitel Techs,
I was curious if the Mitel SX-200 has support for either SIP Trunks or SIP Extensions?

Thanks,
-Iron

Title: Re: Mitel SX-200 - Support for SIP
Post by: acejavelin on December 19, 2018, 07:25:17 PM

No... No SIP support in the SX-200

Title: Re: Mitel SX-200 - Support for SIP
Post by: johnp on January 07, 2019, 07:30:22 PM

You could use an Adtran to convert sip trunks to PRI or even E&M T1. I think you may also pass caller id via the T1 if set as FGD and the Mitel set for *ANI*DNIS