Mitel Forums - The Unofficial Source
Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: Mike_mitel on December 17, 2018, 07:46:44 PM
-
We have a 5000 cp system and mostly is working well. But we want to change the number of rings before auto-answer from 6 to 3.
When a call comes in, it rings a hunt group for a our sales group and operator. If not answered after 6 rings, we have a voice attendant that picks up and gives options to dial by name or by extension.
I expect this change to be in the Timer section, but not sure where? Is it the "No Answer Advance" on the Hunt group? Or the "announcement" or "overflow"? or somewhere else entirely?
Currently, the hunt group timer has "No Answer Advance" 18 seconds, and "Announcement" 18 seconds.. If I change them to lower value, will that accomplish my goal?
-
In the hunt group itself, change the Recall timer. It is likely around 25-30 seconds, lower it to 15 or so.
-
Changes made... Thank you!
Is there any way to test or wait until the system moves back to Day mode?
-
Changes made... Thank you!
Is there any way to test or wait until the system moves back to Day mode?
You can just call the hunt group extension from an internal phone, it will be close (give or take a ring cycle)