Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: jenkinszell on October 30, 2018, 11:07:20 AM

Title: Remove Digital Link
Post by: jenkinszell on October 30, 2018, 11:07:20 AM

Hello we had a T1 connection to an old NEC that has been removed (from Mitel 3300).  I removed the ARS Route, ARS Digits Dialed, Trunk Group, Digital Trunks, Digital Link Descriptor, T1-D4/E1 CAS DID and E and M.  But the Digital Link PLID still exists, I can clear it but cannot delete it.  System is in alarm for DSU msg link.  What am missing, I'm sure it is staring me in the face, but cannot see it? 

Thanks

Title: Re: Remove Digital Link
Post by: NEPhoneGuy on October 30, 2018, 11:20:20 AM

Check under Hardware -> Framers and un-assign the interface type if it's still there.

Title: Re: Remove Digital Link
Post by: jenkinszell on October 30, 2018, 11:51:57 AM

Of course, I knew I missing something.  Thanks, it's all clear now.