Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Labroy74 on September 23, 2018, 10:09:13 PM

Title: BUSY RESET Analog Trunks
Post by: Labroy74 on September 23, 2018, 10:09:13 PM

How do I turn off make busy on analog trunks? I used the Command BUSY <CABINET><SHELF><SLOT> to set it to busy

Title: Re: BUSY RESET Analog Trunks
Post by: Magpye on September 24, 2018, 04:31:37 AM

Hi,
It's RTS in the command instead of Busy to return them to service.

Title: Re: BUSY RESET Analog Trunks
Post by: VinceWhirlwind on September 25, 2018, 07:19:55 PM

Quote from: Magpye on September 24, 2018, 04:31:37 AM

Hi,
It's RTS in the command instead of Busy to return them to service.

It amuses me every time I do the RTS to see the confirmation pop-up, which you don't get when you do the BUSY command.....

Title: Re: BUSY RESET Analog Trunks
Post by: Magpye on September 26, 2018, 05:16:09 AM

Quote from: VinceWhirlwind on September 25, 2018, 07:19:55 PM

Quote from: Magpye on September 24, 2018, 04:31:37 AM

Hi,
It's RTS in the command instead of Busy to return them to service.

It amuses me every time I do the RTS to see the confirmation pop-up, which you don't get when you do the BUSY command.....

I hate restarting a 250 by using the 'RESET SYSTEM' option... I always pause to make sure I really want to click an option that says that

Title: Re: BUSY RESET Analog Trunks
Post by: ZuluAlpha on September 27, 2018, 09:32:55 AM

Quote from: Magpye on September 26, 2018, 05:16:09 AM

Quote from: VinceWhirlwind on September 25, 2018, 07:19:55 PM

Quote from: Magpye on September 24, 2018, 04:31:37 AM

Hi,
It's RTS in the command instead of Busy to return them to service.

It amuses me every time I do the RTS to see the confirmation pop-up, which you don't get when you do the BUSY command.....

I hate restarting a 250 by using the 'RESET SYSTEM' option... I always pause to make sure I really want to click an option that says that

It really is very dramatic for a reboot.