Mitel Forums - The Unofficial Source

Mitel Forums => Mitel Software Applications => Topic started by: bgodde on September 18, 2018, 03:28:33 PM

Title: MSL -- Has anyone seen the following in the Messages file (/var/log)?
Post by: bgodde on September 18, 2018, 03:28:33 PM

Sep 18 12:25:02 micollab2 crond mrtg: 2018-09-18 12:25:02, Rateup ERROR: /usr/bin/rateup found that eth0's log file time of 1537327202 was greater than now (1537287902)
Sep 18 12:25:02 micollab2 crond mrtg: ERROR: Let's not do the time warp, again. Logfile unchanged.
Sep 18 12:25:02 micollab2 crond mrtg: 2018-09-18 12:25:02, Rateup ERROR: /usr/bin/rateup found that memory's log file time of 1537327202 was greater than now (1537287902)
Sep 18 12:25:02 micollab2 crond mrtg: ERROR: Let's not do the time warp, again. Logfile unchanged.
Sep 18 12:25:02 micollab2 crond mrtg: 2018-09-18 12:25:02, Rateup ERROR: /usr/bin/rateup found that loadavg's log file time of 1537327202 was greater than now (1537287902)
Sep 18 12:25:02 micollab2 crond mrtg: ERROR: Let's not do the time warp, again. Logfile unchanged.

Title: Re: MSL -- Has anyone seen the following in the Messages file (/var/log)?
Post by: Navarre on September 18, 2018, 03:48:36 PM

Yes. Your system clock went backwards.

Title: Re: MSL -- Has anyone seen the following in the Messages file (/var/log)?
Post by: martyn on September 18, 2018, 06:39:44 PM

Make sure that you have an NTP reference configured, and that the system is in sync. It should be a reasonably high stratum, preferably 4 or greater.