Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: gordonf on July 18, 2018, 05:03:31 AM

Title: 5320 incoming call issue
Post by: gordonf on July 18, 2018, 05:03:31 AM

On a couple of handsets, when a call is incoming, the incoming calls username is displayed and the user has to press the button to pickup the call after picking up the handset. Any ideas how to resolve this so that the call goes through as normal when the handset is picked up? I cant see what i am missing here.

Title: Re: 5320 incoming call issue
Post by: sarond on July 18, 2018, 07:40:48 AM

Are you able confirm the system type?

Is it the bottom key (prime line) that you have to press to answer the call or is it another key?

Title: Re: 5320 incoming call issue
Post by: gordonf on July 18, 2018, 09:22:30 AM

its MiVoice Busuiness 7.0 SP1 PR1

yeah its the bottom key

thanks in advance

Title: Re: 5320 incoming call issue
Post by: sarond on July 18, 2018, 10:37:31 AM

The only thing I can think is if the phone is in headset mode.

Either program a headset key or you can see if it's active by LOCATE FEATURE EXT XXXX (where XXXX is the extension is question)
Also compare COS for the extension with one that works.

Title: Re: 5320 incoming call issue
Post by: gordonf on July 18, 2018, 12:48:35 PM

brilliant thanks. Yes did the maintenance cmd and it had a headset active. programmed a head set key then deleted it. This fixed it.

thanks so much