Mitel Forums - The Unofficial Source
Mitel Forums => Aastra - MiVoice Office 400 and MiVoice MX-One => Topic started by: mahendra5674 on June 14, 2018, 08:24:20 AM
-
Hi
I am trying to generate raw data by using Hyper terminal,
in call charges put my Pc IP and Port 1080.
And hyper terminal put Server IP and port 1080.
while connected by hyper or putty ist show connection refused or disconnected.
please suggest me, if there is any setting for port open or other.
Mitel A470 4.1 hotfix 5
Thanks
-
Use another port listening tool to test.
In my case, I use Blue’s PortTool.
Blue’s PortTool configuration on the listening PC:
set IP to localhost (127.0.0.1)
Set port (i.e. 8888) *should be same as set in Mitel 400
Click Listening
-
The MiVO400 works a little different to most PABX systems.
It doesn't listen for a connection, it sends data to a listening device, so you need to have your PC listen for a connection from the A400.
Just follow instructions from bojo387.