Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: nMitel on June 13, 2018, 10:55:06 AM

Title: blocking features
Post by: nMitel on June 13, 2018, 10:55:06 AM

Hi,

I have SX200 MX system with 4025's sets, some of these sets are installed in public area people keep messing with the features on these phones like putting them on DND or CF so I was wondering if there is any way to block the system feature codes on these specific sets?

Thanks

Title: Re: blocking features
Post by: acejavelin on June 13, 2018, 02:57:10 PM

Quote from: nMitel on June 13, 2018, 10:55:06 AM

Hi,

I have SX200 MX system with 4025's sets, some of these sets are installed in public area people keep messing with the features on these phones like putting them on DND or CF so I was wondering if there is any way to block the system feature codes on these specific sets?

Thanks

You would build a separate Class of Service with all these options removed, and apply it to that extension. Phones have next to nothing for permissions until they are applied in the COS. 

Title: Re: blocking features
Post by: nMitel on June 13, 2018, 03:48:13 PM

Thank you acejavelin,

 that makes a lot of sense.

 thanks again.