Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Jonathan on September 30, 2010, 03:13:01 PM

Title: wall mount plates for 5200 & 5300 series phones - seeking reccomendation
Post by: Jonathan on September 30, 2010, 03:13:01 PM

What is everyone here using for wall mounting plates for 5200 and 5300 series phones? I put in some Allen Tel wall mount jacks, and while the phone will physically fit on those brackets, the phone is wobbly. Also, the 5304 won't work on that bracket because the keystone jack is not flush with the surface of the plate...

How can I get the phone to stop wobbling? Is there a different kind of plate that will accept an RJ-45 keystone jack (AMP or Allet Tel) that will work better?

Thanks!

Jonathan

Title: Re: wall mount plates for 5200 & 5300 series phones - seeking reccomendation
Post by: Mattmayn on October 01, 2010, 10:00:34 AM

What I typically do is use a faceplate that has label fields. I remove the plastic label covers and back the screws out a little and use those to hold the phone. If you do it just right it works fine.

I assume AMP has a facplate that would do this, we use Panduit.