Mitel Forums - The Unofficial Source
Mitel Forums => Mitel Software Applications => Topic started by: rotary dial tommy on March 15, 2018, 02:51:44 PM
-
what router ports need to be open when connecting ip sets via vlan ?
-
Why would the ports change by vlan?
Have you checked the engineering guidelines?
-
There are about 9 pages of ports listed schematically in the Engineering Guidelines.
You should figure out what path (eg, phone<---->phone; phone<---->controller) involves passing through any kind of filtering (eg firewall or router with access lists) and check the ports in the guide.
-
Remember you cannot do NAT translation either... the MiVB does not support it.