Mitel Forums - The Unofficial Source
Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: nsmith on February 22, 2018, 12:26:03 PM
-
Hey everyone. I am trying to turn off auto-answering on a mitel 5330e IP phone for IC calls. When the phone receives the call, it rings twice and goes to speakerphone. I would like to have it set up to just ring without it answering the call. Thanks in advance!
-
The default feature code is 319.
-
Hi
Anyone can help me with this issue , there is 2 new extension we recently add to our office that are on auto answer and i need to disable this feature but i dont have any idea how to do it , i need some help how to apply this feature code 319 and where should i apply it, phone models are 5320
-
bahram,
Well, if you have access to DB Programming then go to System > Phone-Related Information > Flags > Handsfree On/Off
Remove any extensions you find in there.
Next, go to System > Phone-Related Information > Flags > Ring Intercom Always On/Off
You should really make both of these part of your default programming changes for new phones if you don't want this happening in the future.
Handsfree On/Off is what allows a phone to auto answer on IC calls and Ring Intercom Always on an extension ignores the Handsfree feature flag of any phone that is still turned on and rings the phone anyway.
If you don't have access to DB Programming then you just have to go up to the phone and while it is idle, handset in the cradle, dial the feature code.
If it requires the SPCL key then you will need to make sure that you have a Special Key setup on the phone; default is the Cancel key that looks like an X with a circle around it. The steps would be the same except you would press the SPCL key prior to dialing the feature code.
Thanks,
TE