Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: sunspark on February 13, 2018, 03:32:29 AM

Title: Mivoice in cluster
Post by: sunspark on February 13, 2018, 03:32:29 AM

Hi folks ;

I have 400 nodes in network elements , with multiple cluster.

i dont know if there is a command line who allow to know if pbx XXX is a member of a cluster.

Title: Re: Mivoice in cluster
Post by: ralph on February 13, 2018, 07:50:13 AM

Wow, that's a lot of nodes.

I don't know of any command to know if a PBX is in a cluster or not.
I would think you'd be able to see it in the cluster element form.

Ralph

Title: Re: Mivoice in cluster
Post by: lundah on February 13, 2018, 08:33:50 AM

Network Elements will tell you if the node selected is a member of the same cluster as the local node you're viewing that form at, but the only way to verify if a specific node is a member of *any* cluster is to log into it and look at either Network Elements or Cluster Elements on it.

Title: Re: Mivoice in cluster
Post by: sunspark on February 13, 2018, 09:00:23 AM

Hi everybody ,

Yes i cheked into local network elements , my node is member of it own  cluster.

I ask the question because i have to upgrade this node to V8

but in a cluster , all elements should be in the same release.

i will spend a lot of time to check all nodes.

hope in the next mivoice release a command to check this information.