Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: dhumes0524 on February 05, 2018, 12:10:46 PM

Title: Mitel Wireless LAN Stand Configuration and Engineering Guidelines
Post by: dhumes0524 on February 05, 2018, 12:10:46 PM

Hi everyone, I have recently purchased a Mitel Wireless LAN Stand used but am having trouble configuring it.  I have found an instruction manual online, but it references the "mitel wireless lan stand configuration and engineering guidelines" document - however I cannot find this document anywhere.  I am trying to use this wireless LAN stand to connect my phone to my pre-existing wireless IP network, as I need to place a phone somewhere that a data network cable run does not currently exist.  I have been unable to successfully configure the phone to connect, and need more instructions on how to do this. 

Anyone know where I can get a copy of this document, or have a copy that they can share with me?

PS - my wireless lan stand firmware is version 1.01...I have heard there is a newer version available, but I don't have a login to Mitel download page that will allow me to get this.  Is my only option to go through our channel partner?  I know they will charge me hourly rate for the time for them to download the firmware and send the file to me, and was hoping to avoid that charge.

Title: Re: Mitel Wireless LAN Stand Configuration and Engineering Guidelines
Post by: Dogbreath on February 06, 2018, 06:58:00 AM

This document seems to have been removed from edocs.mitel.com.

What exactly are you struggling with? It's been a few years since our last one worked but from what I can remember there is no default user/pass, you create one as part of the initial setup.

Title: Re: Mitel Wireless LAN Stand Configuration and Engineering Guidelines
Post by: dhumes0524 on February 06, 2018, 01:11:08 PM

I am trying to get it connected to our internal WiFi network as a client.  I have input the SSID, and WPA security key, but I cannot get the phone past DHCP Discovery.  I am trying to isolate if my issue is in the configuration of the wireless LAN stand, an incorrect DHCP option possibly, or some other unseen misconfiguration.

Title: Re: Mitel Wireless LAN Stand Configuration and Engineering Guidelines
Post by: dhumes0524 on February 07, 2018, 12:29:05 PM

I was sent the engineering guidelines and version 1.1 firmware via PM.  Thank you everyone for your help.

Title: Re: Mitel Wireless LAN Stand Configuration and Engineering Guidelines
Post by: FWolynski on April 05, 2018, 07:40:18 AM

Quote from: dhumes0524 on February 07, 2018, 12:29:05 PM

I was sent the engineering guidelines and version 1.1 firmware via PM.  Thank you everyone for your help.

Could you share the guidelines? I'm stuck with the same problem.
I would really appreciate it.

fwolynski@wedu.org

Title: Re: Mitel Wireless LAN Stand Configuration and Engineering Guidelines
Post by: robertal@campbellhall.org on November 08, 2021, 01:45:32 PM

Hi,
 Would it be possible to get the guide as well?  I can't find it anywhere, and am having a tough time getting this stand connected to wireless.  Thanks!

Title: Re: Mitel Wireless LAN Stand Configuration and Engineering Guidelines
Post by: dhumes0524 on November 09, 2021, 10:02:38 AM

I actually just found it after some light digging.  Attaching it here.