Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Rocky on January 31, 2018, 04:18:31 PM
-
Hello,
We are experiencing occasional one way audio and white noise/static on our system, which is a 3300 with 5320e/30e/40e phones. My users are writing down timestamps when they have trouble, and we've been using that to check he Voice Quality Statistics logs. In a couple of these instances, it was obviously a network issue as there were a handful of dropped packets during the call. However, some incidents have 0 dropped packets, but still experience audio issues. Today, a user left a voicemail for me saying that people calling in were getting cut off when she herself got cut off by heavy static during the voicemail. This is the first time we aware of an issue during an internal call, all previous complaints were for inbound/outbound calls. Looking at the logs, there aren't any dropped packets for this particular call either. We have replaced the phone cord with a new one... where it passed through the slot in the base it looked a little rough as it was being pinched, but that was before the call this morning, so obviously wasn't the culprit. This particular set is a 5340e w/ sidecar so I don't have an available like unit to swap it out with, we only have two of these in use at our facility. Any ideas on what we should be looking at?
This is the MP3 of the voicemail the caller left me: https://drive.google.com/open?id=1TL4uHSUNuoByZiRrJEG-FSQYVXt4u3FL
This is the Voice Quality Statistics of the call (highlighted blue): https://drive.google.com/open?id=129kaXahMPGwozQQF8K3tBujKo9BaUHC2
Thanks for any assistance!
-
I would check you bandwidth , it sounds like it's insuficent for your call volume . I would also check your router settings .
-
This is the Voice Quality Statistics of the call (highlighted blue): https://drive.google.com/open?id=129kaXahMPGwozQQF8K3tBujKo9BaUHC2
Thanks for any assistance!
No dropped packets there means it isn't an IP problem. Maybe try rebooting the MCD.
-
Those calls look rock solid on the IP side according to VQ states... I would agree with Vince and perform a reboot, just a programmed reboot overnight should suffice.
Otherwise, look into other things... Is this a virtual or physical platform?
-
Interesting, especially since I just picked up a rare ticket about a quality issue that like yours doesn't seem to be one I can pin on the carrier, and which also doesn't appear IP related.
In this case, you have a caller being put through to the voicemail when suddenly you have junk packets coming through - where is the voicemail? Is it embedded or NuPoint?
Sounds like something isn't unpacking a codec properly. Or not packing it properly in the first place.
Also, my "try a reboot" was much more relevant to it being a physical controller. I should have asked AceJavelin's question first.
-
Those calls look rock solid on the IP side according to VQ states... I would agree with Vince and perform a reboot, just a programmed reboot overnight should suffice.
Otherwise, look into other things... Is this a virtual or physical platform?
Interesting, especially since I just picked up a rare ticket about a quality issue that like yours doesn't seem to be one I can pin on the carrier, and which also doesn't appear IP related.
In this case, you have a caller being put through to the voicemail when suddenly you have junk packets coming through - where is the voicemail? Is it embedded or NuPoint?
Sounds like something isn't unpacking a codec properly. Or not packing it properly in the first place.
Also, my "try a reboot" was much more relevant to it being a physical controller. I should have asked AceJavelin's question first.
Our system has two 3300 CX II Gateways and a virtual server, MiCollab with Voice 6.0.206.0.
I will have it reboot tonight :) Should I be doing that on the regular? Uptime right now is 258 days. On another topic, is there a guide somewhere on updating the server? I'm sure there is a newer version out there, and we purchase Mitel Software Assurance, but I am not sure where to get the software updates.
Voicemail is NuPoint, Build: 17.2.0.3.01
I would check you bandwidth , it sounds like it's insuficent for your call volume . I would also check your router settings .
Bandwidth to this particular switch stack is currently a 2Gb LAG. It has a 30Mb/s base rate (IP cameras) and max burst speed of 73Mb/s in addition to base, so about 5% of the available bandwidth. The traffic sensor on the core shows that the phone VLAN has a peak of 703Kb/s.
-
Updates should be done by your vendor, the software is only available from Mitel to authorized vendors... And yes, there are updates available.
-
You backup your MiCollab database, then take an image of the server.
Build a new virtual server to the correct specs and give the server a temporary IP address in the same subnet as your existing MiCollab server.
Load up the correct new MiCollab software (.msi for HyperV or .ova for VMWare) and run the setup.
The new server will load up then find the old one, absorb its database and then shut the old one down and take over from it after adopting its IP address.
If it fails, you can switch it off and run up the backed up image.
-
Did this ever get resolved?