Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: PeterNicholls on January 31, 2018, 06:02:48 AM

Title: Need to put system into night service.
Post by: PeterNicholls on January 31, 2018, 06:02:48 AM

Hello all,

I need to put the system into night service...using mitel business and can't seem to find how to do this.

Thanks!

Title: Re: Need to put system into night service.
Post by: Tech Electronics on January 31, 2018, 07:03:44 AM

PeterNicholls,

What you are asking for isn't very clear. This is the forum for the MiVoice Office 250 not the MiVoice Business.

To put the MiVO-250 into Night Mode from a phone requires two things.

1. A phone set as Administrator. Go to System > Devices and Feature Codes > Phones > Ext XXXX > Flags > Administrator
2. The feature code for Night Mode. Go to System > Devices and Feature Codes > Feature Codes > Night Ring On/Off [Default: 9860]

Alternately, if the system is 6.0 or higher you could just log into the web page and put it into Night Mode there.

If you actually have a MiVoice Business MCD 3300 system then you would need to go to that forum and post a request.

Thanks,

TE