Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: pakman on November 13, 2017, 10:29:10 AM
-
Hello,
I have an extension who's light won't turn on when you leave a vm. However, if you dial the FAC to activate message waiting the light turns on. If you check the message and delete it the light still stays on. when I do a locate feature ext. it shows dialed message waiting.
Thanks,
-
Hello,
I have an extension who's light won't turn on when you leave a vm. However, if you dial the FAC to activate message waiting the light turns on. If you check the message and delete it the light still stays on. when I do a locate feature ext. it shows dialed message waiting.
Thanks,
NuPoint or embedded voicemail?
-
embedded voicemail
-
Hi packman ,
Check COS --> vocemail softkeys.
-
Maybe it's a bug.
Behavior only on one extension or all ?
Try to stop/ start voicemail using putty.
-
just the one ext. although her neighbor has a phone who's light won't turn on if you leave her a message. I will try and start and stop vm.
thanks,
-
I moved my problem phone to NuPoint as I'm transitioning over and it still won't light. Her COS and COR are the same as all the other agents and their phones light up. I have moved over one other gal in her dept. as well just to test the light. I swapped out phones just in case as well. Not sure what else to try?
-
What type of phone is this?
-
I moved my problem phone to NuPoint as I'm transitioning over and it still won't light. Her COS and COR are the same as all the other agents and their phones light up. I have moved over one other gal in her dept. as well just to test the light. I swapped out phones just in case as well. Not sure what else to try?
For nupoint voicemail you have to check Mitai message waiting in each voicemail
-
These are 5340's and I have checked the Mitai message for each box and it's set properly.
-
My MWI stopped working 2 or 3 weeks ago. Been trying everything.
-
If you have Putty and NuPoint you can log in to the NPM console and select System Maintenance (S) > Additional Options (O) > Lights Test (L) and see if you can light the extensions in question. Sometimes I have to light, unlight, and then usually for good measure give it an "Existing Value" before I exit. That usually does the trick for me.
-
If MAS, verify that the integration to the selected controller has all the values, especially the mitai group
-
If MAS, verify that the integration to the selected controller has all the values, especially the mitai group
Do you mean the HCI Reroute Hunt Group on the controller?
-
Do you mean the HCI Reroute Hunt Group on the controller?
yes
-
If you have Putty and NuPoint you can log in to the NPM console and select System Maintenance (S) > Additional Options (O) > Lights Test (L) and see if you can light the extensions in question. Sometimes I have to light, unlight, and then usually for good measure give it an "Existing Value" before I exit. That usually does the trick for me
How do you do this? I can putting in but I cannot find the cmds to get me into system m. I typed help and I don't see this command.
thanks
-
If you have Putty and NuPoint you can log in to the NPM console and select System Maintenance (S) > Additional Options (O) > Lights Test (L) and see if you can light the extensions in question. Sometimes I have to light, unlight, and then usually for good measure give it an "Existing Value" before I exit. That usually does the trick for me
How do you do this? I can putting in but I cannot find the cmds to get me into system m. I typed help and I don't see this command.
thanks
Hi packman ( attached How to)
change extension doc to docx
-
Thanks, I to just figured it out. Had to type in console first.
-
Hello,
I can light my extension with this method but still cannot light her mailbox.
Do you mean the HCI Reroute Hunt Group on the controller
If I have other phones working could this still be an issue? Where is the located and should it be looked at on each PBX or just the one with the NuPoint HG?
Thanks,