Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: mszodiac on October 13, 2017, 11:08:16 AM

Title: Different XNET status
Post by: mszodiac on October 13, 2017, 11:08:16 AM

Hi Everyone.

I'm puzzled by the XNET status of our systems.  Our main gateway -ICP #1 is showing "out of service" on many endpoints but I'm choosing one end point -ICP #396 as an example.  If I look at ICP 396, it is showing "idle" to ICP 1.  I've rebooted ICP 396.  Same status.  Where is ICP 396 synching to? Any idea?

W

Output from ICP 1:
 Signalling   | Link | Dest |   XNET   | State        |  Owner  | ID   |Status 
Dvc Location  |Handle|Switch| Trunk Id |              |         |      |       
-------------------------------------------------------------------------------
 1 1 11       |      |  396 |          |Out of Service|         |      |       
-------------------------------------------------------------------------------

Output from ICP 396:
 Signalling   | Link | Dest |   XNET   | State        |  Owner  | ID   |Status 
Dvc Location  |Handle|Switch| Trunk Id |              |         |      |       
-------------------------------------------------------------------------------
 1 1 11       |      |    1 |          |Idle          |         |      |       
-------------------------------------------------------------------------------

Title: Re: Different XNET status
Post by: august on October 13, 2017, 08:08:38 PM

Maybe there is a bad ip adress in the ip trunk form.

Title: Re: Different XNET status
Post by: mszodiac on October 16, 2017, 08:44:27 AM

The IP address was the first thing I checked.  It is programmed correctly.