Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Frontline on September 26, 2017, 11:44:06 AM

Title: ACD Overflow and Interflow timers
Post by: Frontline on September 26, 2017, 11:44:06 AM

Hello all,

Just want to make sure I have this scenario correct in my head!

Call enter ACD path 5555 and rings agebts for x number of minutes, then over flows to a second group. If no agents in that secondary group answer the call, it needs to leave the path and end up in a specific mailbox.

I think i have all that set correctly. My question is about the overflow and interflow timers. Do both timers start as soon as the call enters the path? So lets say first group rings for 2 minutes, overflows to second group and rings for an additional 2 minutes. after that time it interflows to a dummy extension that is rerouted always to voicemail

Would my primary group overflow timer be set to 2 minutes and my interflow timer set to 4 minutes?


Thanks in advance...

Title: Re: ACD Overflow and Interflow timers
Post by: sarond on September 27, 2017, 02:56:47 AM

Yes interflow will be set for 4 minutes, overflows for 2 minutes.

I believe if all agents are busy in the first group it will go to the second group immediately. It sill won't interflow for 4 minutes though.

Title: Re: ACD Overflow and Interflow timers
Post by: Frontline on September 27, 2017, 08:20:54 AM

Got it

Thank you!

Title: Re: ACD Overflow and Interflow timers
Post by: johnp on September 28, 2017, 08:38:52 PM

Think you may want to add overflow to interflow before timeout so if they don't answer it goes faster to the interflow point

Title: Re: ACD Overflow and Interflow timers
Post by: Frontline on September 29, 2017, 08:50:55 AM

Ok, just reading about that option. So that will send a call directly to the interflow point as soon as the timer for the last overflow group expires. If the last overflow group timer expires before the interflow timer.