Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: msouva on September 22, 2017, 09:03:17 AM

Title: ISDN Inward Dialing Modification
Post by: msouva on September 22, 2017, 09:03:17 AM

I am looking at switching PRI lines and the new carrier will be sending 11 digits.  The current carrier is sending 4 digits.  I have looked in the forms and when I look at the ISDN Called/Calling Party Inward Dialing Modification form it says they are for the E1 ISDN.  Where should I look for the PRI lines here to achieve this?

Thank you,
Mark

Title: Re: ISDN Inward Dialing Modification
Post by: sarond on September 22, 2017, 09:16:45 AM

Look at your trunk attributes form. This will allow you to absorb or insert digits on the trunk.

Title: Re: ISDN Inward Dialing Modification
Post by: msouva on September 22, 2017, 09:24:32 AM

Thank you sarond!   8)