Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: VinceWhirlwind on July 06, 2017, 08:20:20 PM

Title: Loopback trunk to prevent hairpinning
Post by: VinceWhirlwind on July 06, 2017, 08:20:20 PM

I like my loopback trunks: they catch calls to internal extensions where the full number has been dialled, strip off the leading digits and put the call back onto the controller.
 
But that only works if the DN matches the last digits of the dialled number.
 
If I have an entry in my DID form:
9876 1234 --> 4000
 
How do I catch internally dialled calls to 9876 1234 and send them 4000 without them hairpinning out to my carrier?

Title: Re: Loopback trunk to prevent hairpinning
Post by: VinceWhirlwind on July 06, 2017, 11:27:55 PM

I should add, the "use DID" checkbox is ticked on the Loopback trunk, it just doesn't seem to do anything.

Title: Re: Loopback trunk to prevent hairpinning
Post by: ralph on July 07, 2017, 07:08:35 AM

With system speed calls.
You can loop it can catch the last 7 digits.

Ralph