1
Mitel SX200, SX2000, and older SX platforms / Re: SX200 ICP MX remote connection
« on: October 20, 2016, 12:50:56 PM »
It is a USR modem and the system does not have internet access to log in remotely.
News:
Welcome to Mitel Forums. The Mitel resource - by techies, for techies...
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Mitel SX200, SX2000, and older SX platforms / Re: SX200 ICP MX remote connection
« on: October 18, 2016, 06:49:01 PM »
The DIP switch is set for CTS, and I have tried null modem cables/ adapters.
3
Mitel SX200, SX2000, and older SX platforms / SX200 ICP MX remote connection
« on: October 18, 2016, 01:57:37 PM »
I am trying to set up a modem on the maintenance port on a SX200 ICP MX controller. I can get the modem to answer, but the phone system does not respond. I have tried various cables and modems, with the same results. I can log in directly through the maintenance port.
4
Mitel SX200, SX2000, and older SX platforms / Re: Maid codes not working with PMS
« on: June 26, 2015, 11:17:55 AM »
The PMS interface for the 200 and the VMS both work. The PMS company uses non standard maid codes, so the request was cancelled instead of pursuing a solution in vain.
5
Mitel SX200, SX2000, and older SX platforms / Maid codes not working with PMS
« on: March 18, 2015, 05:42:55 PM »
I have a customer with a SX200 that allows maid codes to be entered at the room phone, but it does not change the status of the room, particularly in the PMS. Any suggestions as to what might be blocking the codes?
Pages: [1]