Messages

1

Mitel Software Applications / MiCC-B Readback

« on: September 28, 2022, 03:52:08 AM »

Hi Everyone,

Is it possible to configure readback in MiCC-B to read a variable coming from SQL query?
I read some documents that i need to use external sources like Microsoft speech API
But what i want to do here is to get the variable and read it within the MiCC.

I can do wav files for all expected digits to arrive.

2

Mitel MiVoice Business/MCD/3300 / Re: SIP trunk - two MiVBs

« on: April 09, 2019, 03:06:57 AM »

What version of software are you on?

Best to do a SIP Trace to see what is happening.

I am using  version 8, ok will try to trace.

Can i create Xnet trunk for systems with standalone licensing mode? because in the help it mention that the license should be enterprise.

Correct, you need enterprise licensing.

That is incorrect, unless requirements have changed in recent versions of software... You need enterprise licensing to cluster and share data, you do not need it for simple Xnet trunks.

In the help it mentions that you need enterprise license to do the trunks, it mentions:

"
Programming

To program XNET trunks

 step 1   Ensure that the System Type is "Enterprise.
"

3

Mitel MiVoice Business/MCD/3300 / Re: SIP trunk - two MiVBs

« on: April 08, 2019, 07:24:19 AM »

yes i set the absorb to zero, but still same result :/

Do i have to set modify any parameters while setting the SIP Peer?

4

Mitel MiVoice Business/MCD/3300 / Re: SIP trunk - two MiVBs

« on: April 08, 2019, 04:41:09 AM »

Can i create Xnet trunk for systems with standalone licensing mode? because in the help it mention that the license should be enterprise.

5

Mitel MiVoice Business/MCD/3300 / Re: SIP trunk - two MiVBs

« on: April 07, 2019, 01:37:38 AM »

yes i have license for SIP trunks,

This is what i did:

1- Created a new network element on both controllers, selected other, marked the SIPPeer, default, port 5060
2- Created a SIP Peer profile, kept the default settings. nothing changed.  (Shall I change anything in the settings here?)
3- Trunk attributes, kept the default, nothing changed ((Shall I change anything in the settings here?))
4- created a route and a digit dialed.
5- modified COS for the route "Public Network Access via DPNSS".

When i try to dial i either get trunk busy or sometimes only silence.

6

Mitel MiVoice Business/MCD/3300 / Re: SIP trunk - two MiVBs

« on: April 06, 2019, 08:53:50 AM »

I am trying to setup the SIP trunk between two controllers to enable dialing from one controller to another.

I already set the network elements, SIP trunk and SEP peer (using default settings) but it is not working, can you help?

7

Mitel MiVoice Business/MCD/3300 / SIP trunk - two MiVBs

« on: April 04, 2019, 07:40:00 AM »

Dear All,

What is the required settings to enable SIP trunk between two MiVB?

Do i need to change any settings other than using the defaults?

version 8.