31
Mitel MiVoice Business/MCD/3300 / Re: 69x0-W phones on MiVB 8
« on: August 14, 2023, 05:20:36 PM »
Load and go
News:
Welcome to Mitel Forums. The Mitel resource - by techies, for techies...
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
32
Mitel MiVoice Business/MCD/3300 / Re: have a customer that doesn't want to Dial 9 or any dial code
« on: August 14, 2023, 05:20:05 PM »
IMHO, trying to do this is a waste of time, unless they make an excessive amount of outbound calls.
33
Mitel MiVoice Business/MCD/3300 / Re: Fast easy way to change the primary DN label on all phones?
« on: August 14, 2023, 05:16:16 PM »
I don't think there is anyway to do what you want, would be good though IMHO, also the ability to change 2 multicall to prime number as name would I think be a better way to go.
34
SIP On Mitel / Re: PRI to SIP
« on: August 08, 2023, 04:41:56 PM »
I think the 904 is capable of doing sip to pri conversion.
35
Mitel Software Applications / Re: MIVB and MIVCR - extension association SRC?
« on: August 08, 2023, 04:35:59 PM »
I would check the mbg teleworker devices to see if the working phones show and make sure that the non working ones are configured the same.
Then most likely put the phone in teleworker mode and point it to the SRC
Then most likely put the phone in teleworker mode and point it to the SRC
36
Mitel SX200, SX2000, and older SX platforms / Re: How to find IP Address for my SX200
« on: August 07, 2023, 05:07:32 PM »
Super Console 1000 is a digital set, It is possible to login using it. I think the only time the default gets changed in the hotel environment is if there is internal routing and the default conflicts with the data network. Anyway, think this would show in form 47
37
Mitel Software Applications / Re: MIVB and MIVCR - extension association SRC?
« on: August 07, 2023, 05:00:55 PM »
The phones may not be pointed to the correct server. THis does depend upon direct or indirect setup for recording
38
Mitel MiVoice Business/MCD/3300 / Re: have a customer that doesn't want to Dial 9 or any dial code
« on: July 31, 2023, 05:01:12 PM »Quote
If they think the DTS key is the solution, why not just replace that with an "Ext Call" key that is a user speedcall that just dials 9. Then they can type the 10 digit number. Same amount of keypresses really.
That was my thought
39
Mitel MiVoice Business/MCD/3300 / Re: Out of hours Voicemail
« on: July 31, 2023, 04:03:08 PM »
The eaisiest way would be to reroute the ring group number to the voicemail hunt group. If it matches nothing the default day/night greeting would play. Depending upon needs, you could also make the dial 0 mailbox as voicemail only
40
Mitel MiVoice Business/MCD/3300 / Re: Converting 3300 MXe3 from a single HDD to raid controller?
« on: July 28, 2023, 06:04:41 PM »
The only gotcha might be if you don't check what partition is used. Basically I would get a backup, install new raid controller, install software one drive 1, I would do a boot install if older otherwise the initial install from tech handbook. Boot up, license and restore. Add second drive and let it rebuild.
41
Mitel MiVoice Business/MCD/3300 / Re: Out of hours Voicemail
« on: July 24, 2023, 09:53:41 AM »
It would help to know how your main number is handled. This can be done in a few different ways and may depend upon available mailbox licenses since I am assuming you are using the embedded.
On thing to note on embedded default operation to the vm hunt group is it will always try to transfer to the dial 0 option on timeout.
If you do not require the dial by name option, this could be setup using a MLAA, it might aslo be an option just for this time period.
On thing to note on embedded default operation to the vm hunt group is it will always try to transfer to the dial 0 option on timeout.
If you do not require the dial by name option, this could be setup using a MLAA, it might aslo be an option just for this time period.
42
SIP On Mitel / Re: Configure SIP Account on 5320e while in SIP mode
« on: July 19, 2023, 05:17:53 PM »
here is the tftp that I use for my 5330
https://drive.google.com/drive/folders/1H1Im6Qp7DsJNAYY2TQ8IrL99tI2iXSTj?usp=sharing
https://drive.google.com/drive/folders/1H1Im6Qp7DsJNAYY2TQ8IrL99tI2iXSTj?usp=sharing
43
Mitel MiVoice Business/MCD/3300 / Re: Analog lines cannot dial out. Inbound is ok
« on: July 18, 2023, 10:34:39 AM »
Check Class of Service to make sure this can be done
44
Mitel MiVoice Business/MCD/3300 / Re: MiVB MXE III 8.0 PR3 Redundant drive dead
« on: July 14, 2023, 05:52:45 PM »
Software installer tool may be restricted to partners, think it would be. Eiter way you would need access to the version load file unless you already have it. If so, a Boot_Install via ftp would load the software
45
Mitel MiVoice Business/MCD/3300 / Re: have a customer that doesn't want to Dial 9 or any dial code
« on: July 14, 2023, 05:46:25 PM »
Hate DTS since there is no ability to reroute to VM. not saying it doesn't work. It is the same as dialing an access code since you need to press a key first. Not thinking this makes things easier or that they may need a club to the head :-)