6
« on: April 25, 2024, 02:54:37 PM »
Jeff,
I am going to assume you don't have copper that would allow you to connect directly to that site.
That being said it depends on whether or not you want it to be in a Page Zone or not. As you probably already know you can only put Digital/IP Phones, Trunks or Paging Interfaces in a Page Zone, basically no direct SIP devices.
Now that doesn't mean you can't use something like the Valcom V-811A or V-821A and then push that over via SIP to another Valcom Paging Device, kind of like what you want to do with option 3.
I know Valcom is a bit expensive, but you may be able to find something comparable by Viking Electronics, Bogen or Terracom. Basically, you are looking for a SIP Gateway that will allow you to use FXO/FXS/Paging Interface that would then connect to another SIP Device at the other location. This is assuming that the network is extended between the two sites in one way or another.
Thanks,
TE