Welcome to Mitel Forums. The Mitel resource - by techies, for techies...
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
HiNo on board DSP on the 430?On the 430
I can see you have resources allocated to DECT and Audio in your screen capture.
Enviado do meu ALE-L21 através do Tapatalk
No on board DSP on the 430?On the 430
I can see you have resources allocated to DECT and Audio in your screen capture.
430 should have 2 built in DSP's I believe.Hi
Have you sorted the DSP?Hi
Enable VoIP, re-assign resources (i.e. DECT) to VOIP.
So have you checked your internet connection?Hi
Are your IP settings all okay? DNS?
Is your 430 on a network that has access to the internet?
If you telnet to your 430, can you do a dnsquery successfully? ping an internet URL or IP?
New licenceHiCheck Permission Set and Digit Barring.Thank you.
You need to configure your digit barring tables accordingly. Then under permission set, assign the barring tables you need. Assign the relevant permission set to users. For example, those who need to dial IDD need a permission set where the external digit barring table allows them to dial 0+country code. (The easiest way is to set all free in the digit barring).
Enviado do meu ALE-L21 através de Tapatalk
On mitel 3300 or 430 series how can transfer a call from land line to Cellphone?
Regards
Enviado do meu ALE-L21 através de Tapatalk
Hi mateHi
First, check your license - how many Mitel SIP terminals are availble there? If 6, then go to Terminals and check if you have terminals created without users - if yes, delete those terminals...If unsure, post a screenshot here...
BR
HiCan you do a rolling trace (SIP/VoIP) and see what the SIP messages say when these two try to register?Hi
You can also try multiple things such as re-creating in the system, factory default the phones, use a different user, use login credentials instead of adding MAC in system....
I re_deployed the devices many times and no success.
The system say licence is enough.
See the screenshot.
Enviado do meu ALE-L21 através de Tapatalk
Can you do a rolling trace (SIP/VoIP) and see what the SIP messages say when these two try to register?Hi
You can also try multiple things such as re-creating in the system, factory default the phones, use a different user, use login credentials instead of adding MAC in system....
Can you try this?Hi. Still not working, can be the licence? Is expired. Licence server is not reachable. Please check your internet connections. Is that information i get on the SWA state.
in WebAdmin under IP Network>VoIP>SIP
Lessen the Session refresh timer for active line supervision to a value like 90 and observe again.
BR/Bojo
HiCheck Permission Set and Digit Barring.Thank you.
You need to configure your digit barring tables accordingly. Then under permission set, assign the barring tables you need. Assign the relevant permission set to users. For example, those who need to dial IDD need a permission set where the external digit barring table allows them to dial 0+country code. (The easiest way is to set all free in the digit barring).
Enviado do meu ALE-L21 através de Tapatalk
Check Permission Set and Digit Barring.Thank you.
You need to configure your digit barring tables accordingly. Then under permission set, assign the barring tables you need. Assign the relevant permission set to users. For example, those who need to dial IDD need a permission set where the external digit barring table allows them to dial 0+country code. (The easiest way is to set all free in the digit barring).
