Messages

1

Mitel MiVoice Business/MCD/3300 / Re: Mitel 3300 DTMF tones to FaxPress

« on: November 24, 2011, 12:29:31 PM »

Hi Ralph,

Thank you very much for your help spending time to post!  Off to test this now 

Much appreciated

Regards

Neil

2

Mitel MiVoice Business/MCD/3300 / Re: Mitel 3300 DTMF tones to FaxPress

« on: November 23, 2011, 11:45:29 AM »

Hi Ralph,

Thank you for your response.

I understand where to find the Multi Set Key Assignment, but once the Programmable Keys dialog opens I am presented with the following columns:

Button Number | Labels | Line Type | URL | Button Directory Number | Ring Type

I was hoping to find out if you had an example of the information I need enter?

Do I need to put the DDI under 'Label', Set 'Line Type' to Forward or Call Forward and under 'Button Directory Number' a command to the FaxPress server?

Any further help would be much appreciated.

Thank you

Regards

Neil

3

Mitel MiVoice Business/MCD/3300 / Re: Mitel 3300 DTMF tones

« on: November 23, 2011, 05:41:58 AM »

Yes.  Can be done.   Do it often.
Put all your Fax port into a hunt group.   Set the hunt group type to "Voice Mail".
Go to the call rerouting always alternative form and program the hunt group number there.
Now take phantom 5330 and program it using the 1st number you want to route to the fax server.
Then in Multiline key assignment form all all the other numbers you want forwarded to the fax server as keys on the phone.
Next go to the call rerouting assignment form and assign the Always alternative number to each of the numbers.
Now when you call those numbers the system will transmit the DTMF as soon as the port answers.
You may need to modify the timers on the fax server to wait for DTMF a few milliseconds.

Ralph
www.foreclosedhomebuying.info

Hello Everyone,

I am new to the forum and have found this really helpful post!

We have integrated a FaxPress with a Mitel 3300 PBX and have a tech note on the above steps with a few screen shots.

There is one screenshott missing for the following configuration:

***Then in Multiline key assignment form all all the other numbers you want forwarded to the fax server as keys on the phone.***

I am unsure as to which drop down option to select in the Multiline Key Assignment when mapping the rest of my DDI's.

Does anyone have a screenshot of the options to select please?

Sorry to re-open this post, but I think it will hopefully be beneficial to everyone reading 

Thank you in advance.

Neil