Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Tom Preston

Pages: [1]
1
MiVoice Office 250/Mitel 5000 / Re: Outgoing UC360 Calls
« on: August 06, 2019, 11:59:50 AM »
Thanks for the idea but, being a SIP device, my vendor says that the House Phone fields are not available as they are with digital/analog extensions. I'm thinking there is no solution for this and users will simply need to dial 8+1.

Thanks again.

2
MiVoice Office 250/Mitel 5000 / Outgoing UC360 Calls
« on: August 01, 2019, 11:33:51 AM »
Good Morning,

We have a UC360 in our conference room and our sales manager has asked us to eliminate the need to dial 8 (outgoing) and 1 (country code) before making a call. She would just like to dial the area code and phone number.

I looked into Dial Plans on the UC360 but it does not appear to have the ability to insert digits. Instead, it acts more like a script that executes when a pattern is matched.

Can the UC360 be configured to insert an 8 and a 1 before every outgoing call?

Thanks,
Tom

3
MiVoice Office 250/Mitel 5000 / Install Error
« on: January 11, 2017, 11:36:22 AM »
Good Morning,

This is my first time here and I was very glad to find this group. Other forums have been invaluable resources and I suspect this one will too; so thank you to everyone who participates. On to the problem...

On December 27, the my workstation's MBR became corrupted and I had no backup. For that reason, I had to rebuild the PC from the ground up. In doing so, I chose to take advantage of the situation by installing Windows 10 Pro x64 rather than the Windows 7 Pro that was previously installed.

After installing the OS and some more urgent software (NAV and such), I attempted to install what I though was the correct version of the Mitel System Administration & Diagnostics program. However, that decision proved to be wrong when I received the attached error (attachment #1). That error message states that the program could not complete the install because it is "Unable to backup file C:\Windows\System32\Datalink2.dll.

In discussing this with my Mitel vendor, he sent me the correct Mitel System Administration & Diagnostics version and told me to install it. In doing so, all went well for a time until another error told me that I must first uninstall the previous version. This error is attached as attachment #2.

So, I went to Add or Remove Programs, found the Mitel System Administration & Diagnostics app and began the uninstall. Almost immediately, it responded with the same error I received when trying the initial install (attachment #1). In an effort to circumvent this error, I opened System Restore and was disapointed to find that no Restore Points exist prior to the original installation of the incorrect version of the Mitel System Administration & Diagnostics program.

So, I'm stuck in a loop. I can't install the correct version of the Mitel System Administration & Diagnostics program until I uninstall the incorrect version...and I can't seem to uninstall the incorrect version. Any guidance or advice is greatly appreciated.

Thanks,
Tom Preston


Pages: [1]