Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: MrNitch on January 25, 2017, 11:33:03 AM

Title: Paging Zone Limit
Post by: MrNitch on January 25, 2017, 11:33:03 AM

Hello again everyone, I have a 5000 HX running 5.1 and somehow it has over 10 paging zones and appears to have no limit I can continue to add zones without getting the 0-9 warning and they work fully and are pageable. I have another 5000 HX that I would actually like to replicate this on. Has anyone happened to come across the way to 'break' this to add more paging zones after the 10th one has been added?


Thank you
Kenny

Title: Re: Paging Zone Limit
Post by: Hovus on January 25, 2017, 04:05:52 PM

If you enable OLM view, expand System Information, you can increase the Page Zones in Meta Database. Not sure what the ramifications are in doing so, but if it's hidden, usually there's a good reason.

Title: Re: Paging Zone Limit
Post by: MrNitch on January 26, 2017, 09:23:12 AM

Thanks Hovus! I agree that is a risky change, since I have another 5000HX version and database config very similar in size and setup that is very stable for the past 5 years with the change I am going to take the risk and take note of the change.

Thank you