Mitel Forums - The Unofficial Source
Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: JasonPetty on December 20, 2016, 01:55:25 PM
-
Where do I find the setting to enable caller id in the MiVoice Office 250 system administrator and diagnostics software?
-
Keep in mind that your dial tone provider needs to also supply it.
-
We do have it just cannot find where to enable on our lines.
-
On the individual trunk, under Service Type. Depending on the software version, select Caller ID or Bellcore FSK Caller ID from the drop down list.