Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: Tripoth on March 08, 2021, 03:54:15 PM

Title: Paging port adapter
Post by: Tripoth on March 08, 2021, 03:54:15 PM

Have the Mivoice 250 and a Valcom 2003a. Client was on a Cisco and the paging was on a trunk port. Wondering what adapter others have used in order to get the paging port to work with the 2003a?
Thanks!

Title: Re: Paging port adapter
Post by: Tech Electronics on March 08, 2021, 04:10:29 PM

Tripoth,

I am confused as to what your issue is at this point.

It seems that you have what you need to make paging work as long as you have an open Trunk Port or Page Port on the MiVO-250 that is.

Hook up the Page Port or Trunk Port (My Preference) on the White/Blue pair and set the dip switch for Loop Start on the Valcom.

Thanks,

TE