Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: johnp on October 27, 2019, 05:26:03 PM

Title: CESID on T1 LW19
Post by: johnp on October 27, 2019, 05:26:03 PM

I know the docs say you have to have a pri, but has anyone checked to see if this is passed in any of the analog networking i.e. *03 option?

Title: Re: CESID on T1 LW19
Post by: acejavelin on October 29, 2019, 04:26:38 PM

To do this on a T-1 your carrier must support it in-band, very few did back in the day... I doubt any do now with the how rare T-1 is used for voice now days, it was a struggle to get them to support it in the 90's and once PRI's became commonplace you just don't hear about this anymore. You would be better off to upgrade to a SX-200ICP with a PRI and reuse the cabinets than to try to get this to work.

Title: Re: CESID on T1 LW19
Post by: johnp on October 29, 2019, 08:05:56 PM

I was thinking of trying this to an Adtran 908e using feature group D i.e. *ANI*DNIS and converting to PRI or SIP