Topics

1

Mitel SX200, SX2000, and older SX platforms / SX-200 AX Fans Starting and Stopping In Logs normal?

« on: November 14, 2016, 10:55:28 AM »

I work for a Reseller, we have been installing AX controllers for over 3 years now, and this week doing a maintenance visit to a site we found logs showing fan 4 stopped and started quite a few times, and occasionally so did other fans.  When I take a look at the status of the fans and temperatures (SHOW DEVICE RM INFO) everything looks happy and only fan 1 is running.  The room was fairly warm, is this a concern or is the fan just starting and stopping to help regulate temperature?

2

Mitel MiVoice Business/MCD/3300 / Multi Tenant System getting wrong MOH off AA

« on: September 11, 2015, 03:24:58 PM »

My trunks have the correct tenant, my extensions associated with the menu node have the correct tenant, my set associated with the 0 out mailbox have teh correct tenant, but when a call comes in to the AA and someone 0s out to operator, they get the hold music for the other tenant.  I suspect it is because my voicemail ports have a tenant using the alternate MOH source but if I change them the other side of the business will have the same problem.  Does anyone have any suggestions?  I just thought of making the voicemail tenant have no MOH source, but I am not sure if that would help or not.  Using embedded MOH sources.

3

MiVoice Office 250/Mitel 5000 / ARS by calling Extension?

« on: February 02, 2015, 03:21:21 PM »

Has anyone ever set up the 5000 to do ARS(so that the 911 routing works properly) but so that it will pick a trunk group based on the dialing extension?  I know I can choose my outgoing extension but then as soon as you dial 9(yes we are renumbered for 9 outgoing) you get external dialtone and if you dial 11 (9-11) you fail at the CO.  This is the first time we have tried to set this up on a system where the two different floors of the building want to use different outgoing LS trunks.  If it were up to me I would have them use a PRI and then we just define the outgoing CLID per set and everyone can use every channel, Unfortunately that isn't how it was sold.  I was hoping to set up a COS that would direct callers in one restriction to one Facility group and another to the second, but it seems that as soon as you hit a match that is your facility group no matter what your COS is.  Any Help would be appreciated.

4

MiVoice Office 250/Mitel 5000 / ACD Queued call count?

« on: October 23, 2014, 06:23:03 PM »

I work for a reseller, and this is our first ACD set up on a 5000.  On the old system the supervisor has a button on her set that will show how many calls are waiting in the queue so she can micromanage who is in or out of the hunt group at any given time.  Is there any comparable feature on the 5000?  Running the newest patch off mitel online...6.0.11.95 I think.

5

MiVoice Office 250/Mitel 5000 / Held Call Reminder Tone

« on: March 27, 2014, 11:08:22 AM »

Pretty sure I know the answer to this, but I have a customer adamant about what they want.

Is it possible on a 5000(mivoice office) to have a phone play an audible reminder tone every 30 seconds or so.  The Parts counter leaves the desk and apparently sometimes forgets they have a call on hold(I don't understand)  they don't like the recall ringing back with a standard ring tone, other people in the office think it is a call and try to answer it.  they would prefer a simple beep ever so often.

If no one responds I will assume you have options of ringback or nothing.

6

MiVoice Office 250/Mitel 5000 / Release trunks on external transfer

« on: February 20, 2014, 03:08:12 PM »

I have been told that most phone systems can do this, and supposedly the 5000 can, but can't get it to work.  I have Centrex LS trunks, and when you transfer someone to an external number it ties up 2 trunks, one for the call in, one for the transfer out.  Does the Mitel need to outpulse something to the CO in order for it to release the trunks and allow the two trunks to simple direct connect?  I have a Norstar expert who says there was a feature code for it in norstars.  I can't see it as a feature lost since then.

7

MiVoice Office 250/Mitel 5000 / Answer ringing call get active call

« on: February 04, 2014, 05:33:36 PM »

we have a Key system setup and if you pick up the handset on a ringing call you will sometimes get the call of someone else already in progress.  any idea why this is happening or what can be done to fix it?