Messages

1

Non-Mitel Chatter / Re: Mitel 5212 to SIP Server

« on: March 02, 2014, 02:42:38 PM »

Thank you again for the response. At least I know this now.

The ADMIN TOOLS option only shows up in SIP mode. You cannot configure any SIP options in MiNet mode, and you cannot do any MiNet options in SIP mode.

I have it set as SIP mode already. What else do I need to do for this to boot up? It only shows a blank white screen. Do I need to set up something first? I read something about setting up a TFTP server for this phone to download a CFG file to to boot up in SIP mode. But I can't find a guide online to do this.

I guess my question is, after I set it up as SIP mode, what should I do next since the phone won't boot up.

2

Non-Mitel Chatter / Re: Mitel 5212 to SIP Server

« on: February 28, 2014, 01:54:22 PM »

Thank you Ace. I set it up to SIP mode, then reboot. It doesn't get an IP address so I can't get to web interface.

This phone works being used as Minet with DHCP. Is there a way to access web interface here? I tried it but it does not pull up a page using IE 8 and I can ping the IP address.

How do we enable http on 5212 IP dual mode model? I found this using the guide.

Press (SUPERKEY), and then press >> until ADMIN TOOLS? appears on the
display.

I tried # instead of >> but there is no option for ADMIN TOOLS.

3

Non-Mitel Chatter / Mitel 5212 to SIP Server

« on: February 28, 2014, 11:36:58 AM »

Hi guys, I am trying to set up this handset(5212IP) to a third party SIP server. The SIP server IP is on a different subnet but ping tests are already successful. My main question is, how do you enter a a SIP Username, password and listening port to my handset? I am not able to find this on the phone options itself. 

I use the link below as my reference. Please share if you have any thoughts on this. Thank you.

http://www.voip-info.org/wiki/view/SIP+settings+for+Mitel+Phones