Messages

1

SIP On Mitel / Downloading firmware off 5320e

« on: June 14, 2018, 04:18:04 PM »

Hi

I wanted to know if its possible to extract/download the firmware (main load) off a working Mitel phone?
I would like to download it from one phone and upload to another (same model).

Any idea how this is possible?
I know you can upload firmware but no option to download this firmware to a file.

Hope someone can point me in the right direction?
Thanks

2

SIP On Mitel / Re: Mitel 5320e - Main Load erased

« on: June 04, 2018, 07:38:25 AM »

Tried that and even without setting an option but its just not picking up an IP address.
Keeps showing the message

"DHCP: Proposed address 192.168.1.12...."

Can't believe I've spent all weekend on this...

3

SIP On Mitel / Re: Mitel 5320e - Main Load erased

« on: June 02, 2018, 09:27:33 AM »

Thanks for saving me so much time, Ditched Vmware to Tftpd64.

Have setup Tftpd64 with Tftp server, client and also DHCP server.
DHCP server is working as its allocating IP addresses for other devices on the network but not for the phone (08:00:0F:A8:0D:C9)

Log repeats this:

Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 08:00:0F:A8:0D:C9 [02/06 14:19:03.169]
DHCP: proposed address 192.168.1.2 [02/06 14:19:06.292]

I seems as though the IP is not allocated, cant browse to that IP or use Tftp client to upload anything.

I have attached screenshots of all the settings. I must be missing something.
Can you please point me in the right direction?

Many thanks

4

SIP On Mitel / Re: Mitel 5320e - Main Load erased

« on: June 01, 2018, 02:29:22 PM »

I believe you are going to have to have a local DHCP Server to supply the options.
Once the phone's Main Load has been erased there are no options you can set on the phone.

Without a controller you could try DHCP Option 43.
This site has some info
http://unixwiz.net/techtips/mitel-ipphone-networking.html

Many thanks for that, just setting up a MS Server on Vmware and setup a local DHCP role in order to supply the options.

5

SIP On Mitel / Re: Blank Screen 5212

« on: May 23, 2018, 11:51:01 AM »

Hi

This is an old thread but I wanted to know how you managed to fix the *No Reg* status?

I have the same issue with a 5320e and Sipgate, I've spent days on trying to get this working.

Hope you can help?
Thanks

6

Non-Mitel Chatter / Re: Mitel 5312 and Sipgate

« on: May 23, 2018, 11:47:16 AM »

Hi

This is an old post but I was wondering if you managed to solve the *No Reg* status on your Mitel 5312?
I am having the same issue on the 5320e with Sipgate

Thanks

7

SIP On Mitel / Re: Mitel 5320e - Main Load erased

« on: May 23, 2018, 09:11:24 AM »

Thanks for your reply.

Have tried that but no success.

Screen shows "Cancelled" and boots to DHCP screen (photo attached)
Anything else I can try?

8

SIP On Mitel / Mitel 5320e - Main Load erased

« on: May 20, 2018, 03:22:56 PM »

Hello Guys!

I picked up some (used) Mitel 5320e and was trying to set them up for a my new business.
Factory reset the phone.
I switched the unit to SIP mode (no problem), however I couldn't get the unit to register with Sipgate.
Kept flashing *No Reg* after a few minutes of powering on the phone.

As I wasn't having any luck I started to play around with the setup and selected the "Erase Main Load"
Now I cant get into the WEB UI or setup of the phone.
It shows:
DHCP: Discovery
Option 129 missing

I did some research and have my SolarWinds TFTP server active, also managed to
find and download the firmware for the phone, now the question is how do I get the firmware on it without being able to access the phone.
Or have I just bricked the unit?

Hope someone can help