Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: acejavelin on February 09, 2016, 02:47:28 PM

Title: 200ICP v4 to v5
Post by: acejavelin on February 09, 2016, 02:47:28 PM

Is a new license key required, or can I simply upgrade from 4.0 UR1 to 5.0 UR5 and walk away or will I need to take over the AMC app record?

I have a customer that we do not own the AMC record for, and they want to replace 7 of their old 4025's for new 5340e sets...

Title: Re: 200ICP v4 to v5
Post by: johnp on February 09, 2016, 06:20:41 PM

If I recall this should be just an upgrade without any license. I think this was always the way the 200 worked.

Title: Re: 200ICP v4 to v5
Post by: acejavelin on February 10, 2016, 08:18:41 AM

Hmm... I'll have to take one we have in AMC and set it as v4, pull the license sheet, then set it v5, pull the license, and compare. I can't remember if it changes, or even matters once it's licensed.

EDIT: The MOC code and Options Password do not change, so I guess I am good to go.

Title: Re: 200ICP v4 to v5
Post by: johnp on February 10, 2016, 10:35:20 PM

If you change nothing, it stays the same across levels. You only get a new moc password for feature changes.