Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: tlmagnus on December 29, 2014, 05:11:43 PM

Title: 5448 PKM on 5340 SX200ICP
Post by: tlmagnus on December 29, 2014, 05:11:43 PM

Just tried installing a 5448 PKM on a 5340.  Customer has a SX200ICP MX.  For some reason, the PKM just flashes all the lights orange and in form 9 it does not give me the option to open the PKM.  Tried reseating the interface module (it's a version 2, so has the little power cable that goes in there).  Still no luck.  Any ideas?

Title: Re: 5448 PKM on 5340 SX200ICP
Post by: fifty5footer on December 30, 2014, 01:07:54 PM

5340's do not support pkm's, on a 200 ICP

Title: Re: 5448 PKM on 5340 SX200ICP
Post by: tlmagnus on December 30, 2014, 02:52:14 PM

So Mitel lists the 5340 as not supporting the PKM, but does not indicate the 5340e as not supported, does anyone know if this is the case or if both do not support the PKM?

Title: Re: 5448 PKM on 5340 SX200ICP
Post by: marcolive on January 01, 2015, 01:59:54 AM

I'm pretty sure both doesn't support PKM.

Title: Re: 5448 PKM on 5340 SX200ICP
Post by: fifty5footer on January 01, 2015, 01:40:11 PM

Neither of them support the PKM.