Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: bluewhite4 on October 25, 2011, 04:16:49 PM
-
How can I setup a Polycom SoundStation2 on an ONS port?
I have the COS of the ONS port set to allow flash and conference calls.
However, if I dial person A from the Polycom, then hit flash, dial person B, and hit Flash, it returns me to person A instead of giving me dial-tone via which I can dial the Conference call FAC.
What am I missing?
Thanks
-
Check the COS to see if brokers call is enabled.
Ralph
-
Also check the flash timer. Cant remember exact time but I have had to adjust them before.
-
Actually Ralph, I got the answer from you, only for a past post on another forum. It was the Call Waiting Swap in the COS. Thanks though!