Mitel Forums - The Unofficial Source

Mitel Forums => Mitel Software Applications => Topic started by: mitel361 on December 17, 2020, 11:38:05 AM

Title: Add UPiQ Port
Post by: mitel361 on December 17, 2020, 11:38:05 AM

Version MICC 9.1.2 and seeing alerts regarding no port available for UPiQ.  I do have a port that I can add, however not sure where to add.

For other Workflows such as inbound or outbound, I add ports in the Workflow.  I've reviewed the Workflows and Subroutines used for UPiQ and don't even see the current ports listed.  For these, I see the Paths listed, not Ports.

Where can Ports be added for UPiQ?

Thanks!

Title: Re: Add UPiQ Port
Post by: sarond on December 17, 2020, 06:30:14 PM

In YSE you would add a new extension. From there you can choose the extension type which would be "UPiQ port 5020 IP"