Topics

1

Mitel SX200, SX2000, and older SX platforms / 911 Alarm on SX-200 Digital release 62

« on: February 03, 2017, 04:26:54 PM »

A customer has an old SX-200D.  They have a Metrotel Digit Grabber that used to show the extension that dialed a 911 call.  Does anyone have any idea of how this might have been connected to show an extension that called 911?
thanks

2

Mitel MiVoice Business/MCD/3300 / MiVB CX as PRI Central Office for testing

« on: January 07, 2017, 10:18:43 PM »

We are trying to configure a MiVB CX running 7.2 software as a CO (network side) PRI emulator for testing PRI connections to other PBXs before installing them in the field.  Not able to get the D channel to come up.  Any configuration suggestions would be appreciated.

B

3

Mitel MiVoice Business/MCD/3300 / Sonicwall config for SIP trunk on MCD without MBG

« on: June 16, 2016, 10:21:57 PM »

We are setting up a MiVoice Business 7.2 on a CX II controller.  We have a Fusion SIP trunk without an MBG proxy.  We are able to make and receive calls but there is no audio.  The firewall is a SonicWALL 2400.  Does anyone have any information on how to configure the firewall to pass RTP traffic to the phones after the call is up?

thanks

Barry

4

Mitel MiVoice Business/MCD/3300 / Configure HP1920 Switch for LLDP to boot 5340 on VLAN

« on: April 02, 2016, 01:02:29 PM »

We are trying to configure an HP1920 switch to tell a 5340 phone to boot on VLAN 2 which is the PBX VLAN and has the DHCP server for the voice network.  Hoping to get the phone to boot on VLAN 2 and still be able to use the PC port on VLAN1.  Not having much luck.  The switch does not have much of a CLI.  Tried using LLDP settings and Voice VLAN settings.  Not sure if I need both or not.  Any suggestions would be appreciated.