Mitel Forums - The Unofficial Source

Mitel Forums => Non-Mitel Chatter => Topic started by: Kjvance1 on February 05, 2016, 08:17:18 AM

Title: Cisco Port-Security and Mitel UC360 Conference Phones
Post by: Kjvance1 on February 05, 2016, 08:17:18 AM

Hi,

Has anyone had an issue with getting the Mitel UC360 to work on switchports configured with port security ?

We have had several cases where UC360s are plugged in and powered up, but we see nothing incoming from the UC360 in packet captures.

In each case we remove port security, and bounce the port then the UC360 starts sending traffic . Also in each case if we then shut the port, reinstate port security the UC360 appears to stop sending traffic. This behaviour is consistent.

Has anyone had issues with setting up these devices on Cisco 2960 POE switches?

Title: Re: Cisco Port-Security and Mitel UC360 Conference Phones
Post by: martyn on February 07, 2016, 04:33:31 PM

Can you post a copy of the config on the port when it doesn't work?