Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: Felix on March 03, 2016, 06:08:58 AM

Title: Mitel SX2000 Maintenance Port Locked
Post by: Felix on March 03, 2016, 06:08:58 AM

Hi all,

Just wondering if someone could give me a pointer to the issue I am having?

I have a SX2000 Light Non-Redundant PBX which seems to have the maintenance port locked out and unresponsive. I have tried connecting via a tracker and direct on the port with the same issue.

I have rebooted the PBX twice and also via a scheduled reboot but I am still not getting any response.

Does anyone have any ideas or is replacing the card my last option?

Thanks all.

Title: Re: Mitel SX2000 Maintenance Port Locked
Post by: ralph on March 03, 2016, 08:29:53 AM

The only thing I could think of would be sending it a CTL-Q

Ralph

Title: Re: Mitel SX2000 Maintenance Port Locked
Post by: lundah on March 03, 2016, 08:49:28 AM

Can you telnet into the Ethernet interface on the MC3E? Is there a peripheral cabinet attached? Those should also have a serial port on the back you can try connecting to.