Mitel Forums - The Unofficial Source
Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: tlmagnus on November 10, 2014, 11:18:07 AM
-
Hi,
Having some trouble with a carrier on number delivery for a PRI. The customer switched carriers, and formerly the number delivery was working correctly to AT&T cell phones. Now however the display just shows "unknown" when receiving a call from the customer. The new carrier says that AT&T requires four fields to be correct when calls go out; Nature of address, number plan, address presentation, and screening indicator. I have not seen any of these fields on an ICP. However, the carrier is using an Adtran on site to provide the PRI. Should these settings be found in there?
Thanks!
-
So the carrier sent over their debug log. They said that the CDN_TON and CDN_NPI should not show unknown. Anybody know where this is supplied from? I thought that this was part of the NI2 standard.
Message Type : SCP_X_LONG Originate MSG
Progress Indicator: NIL_VALUE
Prog_Ind Location : NIL_VALUE
BC_NAME : SPEECH
CDN_Digits : (edited out for posting)
CDN_TON : UNKNOWN CDN_NPI : UNKNOWN
CGN_Digits : 7017878602
CGN_TON : UNKNOWN CGN_NPI : UNKNOWN
CGN_SI : NETWORK_PROVIDED CGN_PI : PRESENTATION_ALLOWED
NI-PRI CGN_SI_PI : SI_NETWORK_AND_PI_ALLOWED
DIGITS :
LAST DIGITS MSG : YES
LTID :ISDN 115
BDN_Digits : 7017878500
SSD OPTIONAL PARM
LENGTH: 10
DATA: 01 08 00 20 0F CD 00 0A 0C 00
SUBPARM ID : 1 - peer sig info
SUBPARM VER : 0
SUBPARM LEN : 8
SUBPARM DATA: 00 20 0F CD 00 0A 0C 00
OUTGOING 10:27:04.454 NODE TYPE= GWC_NODE
DS512: ENCAP MS_CARD= 253 MS_PORT= 125 NODE= -515
NN= 0020 TN= 0FCC MSGTAG= 00 ROUTE= FDFD ERROR= 00 LENGTH= 0E
AGENT= CKT GFCOUNTY 23
81 42 00 2D 1A 39