Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: doctora on August 24, 2010, 09:19:44 AM
-
I have a 3300 running release 4.1 SP1. Is there a way to change the plid number of an analog station to another analog plid without deleting it and rebuilding it?
Thanks
Mark
-
You could always try this:
If you want ext 1234 ONS PLID 2-1-1-2 to actually be moved to ONS PLID 3-1-1-6 for example, create a temporary extension on 3-1-1-6 like 91234. So now you have 1234 on 2-1-1-2 and 91234 on 3-1-1-6. Go to maintenance and type the following command:
MOVE SWAP EXTENSION 1234 with 91234
Once the operation completes, 1234 will be on 3-1-1-6 and 91234 will reside on 2-1-1-2...simply delete 91234. Hope this helps.
-
Sweet - neat solution Bob....
-Chak
-
Thanks I will give it a try.
-
works for DNI sets too but they have to be same phone type. Also if you do this in a hotel and the COS is set for a bedroom (or in guestroom assignment on newer software) you cant do this you have to change COS and then do the command then change COS back