16
Mitel SX200, SX2000, and older SX platforms / Re: system not loading
« on: October 22, 2018, 03:22:13 PM »
acejavelin already done. this system is on its way for retirement 
News:
Welcome to Mitel Forums. The Mitel resource - by techies, for techies...
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
Mitel SX200, SX2000, and older SX platforms / Re: system not loading
« on: October 22, 2018, 12:19:14 PM »
surprisingly the system came back up after an extended period of time of loops through these errors, it happened shortly after I got the DSP module delivered to the site and before replacing in it or do anything on the controller!
18
Mitel SX200, SX2000, and older SX platforms / system not loading
« on: October 19, 2018, 04:20:16 PM »
Hi.
my Sx200 ICP is not loading I keep getting
machine check
Exception next instruction address: 0x00073ccc
Machine Status Register: 0x00046030
Condition Register: 0x80000000
Task: 0xd390000 "tAppStartup"
xfile: cannot write /db/xrtc file too big
not sure what causes that. what could be done to solve this.
my Sx200 ICP is not loading I keep getting
machine check
Exception next instruction address: 0x00073ccc
Machine Status Register: 0x00046030
Condition Register: 0x80000000
Task: 0xd390000 "tAppStartup"
xfile: cannot write /db/xrtc file too big
not sure what causes that. what could be done to solve this.
19
Mitel MiVoice Business/MCD/3300 / SIP Channels Status
« on: October 19, 2018, 02:28:03 PM »
HI,
Can someone help with a way or a command to show the currently used SIP channels on a 3300 system?
Can someone help with a way or a command to show the currently used SIP channels on a 3300 system?
20
Mitel SX200, SX2000, and older SX platforms / Re: Forwarding extension to a menu tree mailbox
« on: October 16, 2018, 11:23:03 AM »
Tt worked. the interflow part that I was missing.Thank you johnp
21
Mitel SX200, SX2000, and older SX platforms / Forwarding extension to a menu tree mailbox
« on: October 05, 2018, 10:26:26 AM »
HI,
I'm trying to forward extension 333 on Busy/no answer to a menu tree voicemail box. I created a phantom extension 444 with menu tree mailbox and forwarded extension 333 to it. but when I call extension 333 now I still get 333 voicemail not the menu tree for phantom extension 444.
I know in case of forwarding and when there is no answer on the forwarded-to extension the original extension's voicemail picks up. any tips for getting the menu tree to pick up, in this case, for This SX200 MX system? I was able to do it on the 3300 by using NameTag hunt group but I dont think this is an option on the SX200.
Thanks.
I'm trying to forward extension 333 on Busy/no answer to a menu tree voicemail box. I created a phantom extension 444 with menu tree mailbox and forwarded extension 333 to it. but when I call extension 333 now I still get 333 voicemail not the menu tree for phantom extension 444.
I know in case of forwarding and when there is no answer on the forwarded-to extension the original extension's voicemail picks up. any tips for getting the menu tree to pick up, in this case, for This SX200 MX system? I was able to do it on the 3300 by using NameTag hunt group but I dont think this is an option on the SX200.
Thanks.
22
Mitel SX200, SX2000, and older SX platforms / Re: Blocking out calls
« on: September 18, 2018, 06:09:14 PM »
SX-200MX
23
Mitel SX200, SX2000, and older SX platforms / Blocking out calls
« on: September 18, 2018, 12:54:45 PM »
Hi,
I'm trying to block all outgoing calls for a specific extension, I created a new route and allowed all CORs to access it except the COR I assigned to that extension but this ended up blocking outgoing calls for all extension. how could I do this cleanly?
I'm trying to block all outgoing calls for a specific extension, I created a new route and allowed all CORs to access it except the COR I assigned to that extension but this ended up blocking outgoing calls for all extension. how could I do this cleanly?
24
Mitel SX200, SX2000, and older SX platforms / Re: System keeps rebooting
« on: September 18, 2018, 12:50:28 PM »
Hi, It ended up being the Bay Power Supply, the RINGING light was solid red all the time when I replaced it the light cleared and the issue was solved. Thank you.
25
Mitel SX200, SX2000, and older SX platforms / Re: System keeps rebooting
« on: August 01, 2018, 01:51:40 PM »
I have four bays in this site, you suggest replacing the power supply for all of them? and those bays are on a UPS that its batteries been replaced recently.
26
Mitel SX200, SX2000, and older SX platforms / Re: System keeps rebooting
« on: July 31, 2018, 03:43:34 PM »
here is other logs messages from yesterday.
27
Mitel SX200, SX2000, and older SX platforms / System keeps rebooting
« on: July 31, 2018, 02:42:23 PM »
Hi,
I have a SX200 EL system that keeps on rebooting for some reason, all the logs show is "Main Control Power up!" last week when the problem started I had error logs like "excessive message set removed from service" on two DNICs which I replaced and the alarm status went back to "No Alarm" but that did not fix the rebooting issue and now all I see on the logs is "Main Control Power up!", any idea on what might be causing that?
Attachment is a screenshot of the current logs.
I have a SX200 EL system that keeps on rebooting for some reason, all the logs show is "Main Control Power up!" last week when the problem started I had error logs like "excessive message set removed from service" on two DNICs which I replaced and the alarm status went back to "No Alarm" but that did not fix the rebooting issue and now all I see on the logs is "Main Control Power up!", any idea on what might be causing that?
Attachment is a screenshot of the current logs.
28
Mitel SX200, SX2000, and older SX platforms / Internal code calling
« on: July 12, 2018, 01:27:58 PM »
Hi everyone, I have code T021 ringing on extension 129 and I'm not sure where that's coming from or what it represents can someone clue me in please? Thanks
29
Mitel SX200, SX2000, and older SX platforms / Re: blocking features
« on: June 13, 2018, 03:48:13 PM »
Thank you acejavelin,
that makes a lot of sense.
thanks again.
that makes a lot of sense.
thanks again.
30
Mitel SX200, SX2000, and older SX platforms / blocking features
« on: June 13, 2018, 10:55:06 AM »
Hi,
I have SX200 MX system with 4025's sets, some of these sets are installed in public area people keep messing with the features on these phones like putting them on DND or CF so I was wondering if there is any way to block the system feature codes on these specific sets?
Thanks
I have SX200 MX system with 4025's sets, some of these sets are installed in public area people keep messing with the features on these phones like putting them on DND or CF so I was wondering if there is any way to block the system feature codes on these specific sets?
Thanks