Mitel Forums - The Unofficial Source
Mitel Forums => SIP On Mitel => Topic started by: nowickj on November 09, 2018, 08:21:11 AM
-
hello.
Can Someone help Me, and write how to upgrade OMM v.2.6.4 to the newest version 8.0 I have 5 RFP (4x RFP32, 1x RFP34) Master and Standbay OMM are on RFP32. SIP-DECT system is associated with MiVB 8.0 SP3 PR2.
-
you need to upgrade your RFP's to v.4.0 and then you can upgrade to v6.02 and later
more specifically, upgrade all your RFP's to ver 4.0 ( put the file on a USB drive, make sure it is formatted FAT32)
the file is called : iprfp3G.dnld
then once successfully updated you can upgrade to 6.2 and later
-
hi guys ,
i'm in the same case . never work before with OMM v2.6.4 . does any one have the good process to upgrade from v2 to V7 or v8 ?
i have RFP31 and RFP32
thanks !
-
you need to upgrade to v4
see this - it may help you on your way
https://sudonull.com/post/74055-How-to-make-friends-Mitel-SIP-DECT-and-Asterisk
-
you need to upgrade to v4
see this - it may help you on your way
https://sudonull.com/post/74055-How-to-make-friends-Mitel-SIP-DECT-and-Asterisk
thank you my friend i will check .
How i can u see if the Omm is installed on linux server our in the base station?
-
see page 41 - it may help - look for cfg files in the omm sub directory
https://www.voipinfo.net/docs/mitel/SIP-DECT_OM_DECT_Phone_Sharing_Prov_6.2_EN_2016-07-01.pdf
-
lots of info on this forum as well
-
in the link below , they talk about a new configuration not an upgrade.
https://sudonull.com/post/74055-How-to-make-friends-Mitel-SIP-DECT-and-Asterisk
-
I know, but it might be helpful to others in years to come :-)
-
I know, but it might be helpful to others in years to come :-)
Yes sure.
I need to uograde my mivb from v4 to v8 and i need to know if i have to upgrade also Omm or not