Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: dexs345 on December 07, 2010, 08:47:49 AM

Title: mitell 3300 and uk pri isdn
Post by: dexs345 on December 07, 2010, 08:47:49 AM

Hello again,

I am getting on with the mitel pretty well and in the next 2 days or so i will be installing my first isdn30 on a mitel 3300. However i have been playing about with another system (currently spare) in my isdn 30 and cant see to get it working at all.

Does anyone have a cheat sheet or how to guide to setup pri on the 3300?

Thanks for your help people

Title: Re: mitell 3300 and uk pri isdn
Post by: bobcheese on December 07, 2010, 04:18:13 PM

Use the help file for this, thats what I normally do if I forget something when setting up PRI. It goes through each form and specifies what to set. log in to 3300 click help then; system programming->Trunks->Digital trunks->Program embedded PRI/QSIG (presuming you are using an embedded module for PRI).

Title: Re: mitell 3300 and uk pri isdn
Post by: dexs345 on December 09, 2010, 07:12:06 AM

Thanks for that. i had everything setup correctly however British telecom had a fault their site and i had to reset the NTE.

I can dial in without a problem however i cant seem to dial out? back to the help file me thinks.

Title: Re: mitell 3300 and uk pri isdn
Post by: bobcheese on December 09, 2010, 07:55:56 AM

have you done your ARS programming including route assignment?

Title: Re: mitell 3300 and uk pri isdn
Post by: MitelUK2010 on December 10, 2010, 06:25:54 AM

If you are getting access denied then its a COR issue. Try using individual trunk select to eliminate COR and if that works you know your trunks are set up correctly and can then resolve the COR issues.